Paper Cup machine operating procedures on the start of production work:
1.After the completion of the preparation work, in the motor will start a shout“On” in the absence of any response, can start the motor. This action is to prevent the mechanic in the opposite side or behind the machine repair, the operator can not see and cause unnecessary safety accidents.
2.Carefully observe the machine operation, take a cup to check the paper cup bonding effect, preheat, main heat, Knurling there is no yellowing, damage to the paper cup situation.
3.Check the bonding effect of adhesive, there is no indirect bad situation, the bottom of the cup and adhesive bonding firm degree for tearing and pulling phenomenon is appropriate, there is indirect not pulling is suspected to leak cup, after water test shall prevail.
4.In normal operation, such as the discovery or sense of the machine is abnormal place to raise the cup body, such as the last cup after the kerosene can be stopped to check.
5.Midway unexpected downtime for a longer period of time to re-open the machine, the market will be fourth. Take out five, check whether the knurled parts are bonded.
6.The Paper Cup machine operator pays attention to the molding condition of the cup rim, the cup body and the cup bottom at any time in the normal production.
7.Employees in the operation of concentration, found abnormal voice or cup bottom molding is not good, to stop immediately to check, to prevent causing greater losses.
8.Operators in the production process to do a serious and responsible for their own production of the Cup every hour with boiling water test once, each time 8.
9.Before sealing the carton, the cup machine operator should check the quantity of small package, cut and paste the product certificate or product design on the upper right corner of the left side of the carton, and fill in the carton with the work number and the production date, finally, seal the box and stack it neatly in the designated position.
Post time: May-06-2023